
Exotic and alloy scrap metal buyer
SoCal Scrap Metal Buyer buys Inconel, titanium, cobalt alloys, tungsten and every other metal except iron and steel. Send photos and a rough weight for a quote, and we come to you.
- 28NiNickel
- 22TiTitanium
- 27CoCobalt
- 74WTungsten
- 42MoMoly
- 73TaTantalum
- 41NbNiobium
- 29CuCopper
- 13AlAluminum
- 30ZnZinc
- 50SnTin
- 82PbLead
No iron, no steel. Every other metal is worth a photo.
- Every metal but iron and steelExotics and alloys first
- Free pickupAnywhere in Southern California
- Quotes from photosA few pictures and a rough weight
- Call (562) 685-9090Or send the quote form
Nickel superalloys, titanium, cobalt and the refractory metals
Inconel, Hastelloy and Monel, titanium, cobalt alloys such as Stellite, and the refractory metals: tungsten, molybdenum, tantalum and niobium. Lathe chips, offcuts, bar ends and retired parts all count, and each alloy kept apart is quoted on its own.

Inconel
Inconel 600, 625, 718 and other nickel superalloys
See what we take
Titanium
Solids, turnings and sheet, CP grades and 6Al-4V
See what we take
Hastelloy, Monel and nickel alloys
Hastelloy, Monel, Waspaloy, Incoloy and pure nickel
See what we take
Cobalt alloys
Stellite and other cobalt-chrome scrap
See what we take
Tungsten
Heavy alloy, pure tungsten and carbide
See what we take
Molybdenum
Moly sheet, rod, TZM and furnace parts
See what we take
Tantalum and niobium
Refractory sheet, rod, wire and offcuts
See what we takeNot on the list?
If it is not iron or steel, send a photo. See every metal we take.
All metals we buyCopper, brass, aluminum and the everyday metals
Copper pipe and wire, insulated cable, brass valves and fittings, bronze, aluminum window frames and wheels, lead and zinc. The copper grades guide explains bare bright, No. 1 and No. 2 copper before you sort.

Copper
Bare bright, #1 and #2 copper, pipe and turnings
See what we take
Insulated copper wire
Building wire, cable and harness wire
See what we take
Brass and bronze
Yellow brass, red brass, bronze and turnings
See what we take
Aluminum
Extrusion, sheet, castings and wheels
See what we take
Lead, zinc, tin and more
The other nonferrous metals, by the pound
See what we takeEverything else is worth a photo. If a magnet grabs it hard, it is most likely iron or steel, but nickel and cobalt pull on a magnet too, so send a picture when you are not sure. We do not buy catalytic converters.
Sell scrap metal to us in three steps
- Photos and a rough weightShow the whole lot, then a few pieces up close. Send them with the quote form or to help@socalscrapmetalbuyer.com, or call (562) 685-9090.
- A quote for your lotWe quote what the photos show: the alloy, the form, how clean it is and about how much. There is no price list, because no two lots are alike.
- Free pickupWe come to you anywhere in Southern California, from a shop floor to a home garage, and load it. Keep a photo ID handy for the paperwork.
Every step of selling to us, and what California asks of sellers
Free pickup wherever the metal sits
We pick up from machine shops, aerospace subcontractors, plants, jobsites and homes in counties including Los Angeles, Orange, Riverside, San Bernardino, San Diego, Ventura and Imperial. Tell us how to reach the metal: a loading dock, a forklift, a gate code, a flight of stairs.
- Los Angeles
- Orange
- Riverside
- San Bernardino
- San Diego
- Ventura
- Imperial

Why exotic and alloy scrap leads the list
Southern California makes aircraft parts, and aircraft parts are cut from the alloys we want most. California EDD counted 53,000 jobs in aerospace product and parts manufacturing in Los Angeles County in September 2026, and 12,700 in San Diego County.
A lot of the metal a shop buys never flies. USGS uses the aerospace term buy-to-fly ratio for the weight of metal bought against the weight of the finished part: about 5 to 1 for titanium parts in 2004, and an average of about 7 to 1 for superalloy parts in 1998. Much of the difference comes off the machine as turnings, the curled chips cut on a lathe or mill, and the rest as solids: offcuts, bar ends and scrapped parts.
Jet engines lean hard on nickel: a 2004 USGS circular put nickel-base superalloys such as Inconel 718 at about 40 to 50 percent of a jet engine's weight. That is why Inconel, Hastelloy, Waspaloy, titanium, cobalt alloys, tungsten, molybdenum, tantalum and niobium sit at the top of every page here.
Sources: California EDD, Current Employment Statistics: Los Angeles County; California EDD, Current Employment Statistics: San Diego County; USGS Circular 1196-Y, titanium recycling (2010); USGS Circular 1196-A-M, metal recycling flow studies (2004).
What sets the value of a lot
Four things: the alloy, the form, how clean it is, and the weight. We quote each lot from its photos and keep no price list, because metal markets move; USGS reports that after China put export controls on selected tungsten items in February 2025, tungsten prices rose sharply through the year.
Alloy. One alloy per container. USGS says new titanium scrap such as clippings and turnings is usually segregated by material specification and melted back into a product with the chemistry wanted, so a drum of one known grade, meaning one exact alloy recipe, is ready to be matched to a melt. Exotic metal recycling runs on that sorting: of the superalloy scrap processed worldwide in 1996, about 70 percent was recycled into the same alloy, USGS reported.
Form and cleanliness. Solids are easier to identify than chips. Turnings carry cutting oil and moisture, and the ReMA trade guidelines for aluminum turnings, for one, set deductions for fines (dust-size particles), dirt, loose iron, oil and moisture. Drain oily chips and keep floor sweepings out of the drum.
Revert. Clean scrapped parts and offcuts of one known alloy, ready to go back into a melt, are called revert. USGS describes engine revert, processed from scrapped engine parts, as a high-quality, lower cost superalloy meltstock.
Sources: USGS Mineral Commodity Summaries 2026: Tungsten; USGS Circular 1196-Y, titanium recycling (2010); USGS Circular 1196-A-M, metal recycling flow studies (2004); ReMA, ISRI Specifications (July 2026); USGS Mineral Commodity Summaries 2026: Rhenium.

Shop lots and household lots
Shops and plants. Turnings in drums, solids in gaylords (pallet-size cardboard boxes), revert from a teardown, rejected parts. Tell us the alloy or the spec from the work order, keep each alloy in its own container, and label the drums.
Contractors and homeowners. Copper pipe from a repipe, wire from a remodel, brass valves and fittings, aluminum gutters, window frames and wheels. A photo of the pile on the garage floor and a rough count of buckets is enough to start.
The steps are the same for both, and so is the free pickup. How selling works covers each step and what California asks of a seller at the sale, and the alloy separation guide shows shops how to keep bins apart.
Know your metal before you sell it

How to identify scrap metal
A magnet, your eyes and the weight in your hand
Read it
Keeping alloy scrap separate
For machine shops: bins, turnings and solids
Read it
Copper scrap grades
Bare bright, #1 and #2, explained
Read it
Brass vs bronze
How to tell them apart, and why it matters when you sell
Read it
California scrap metal law for sellers
ID, photos, thumbprints and the third-business-day rule
Read itCommon questions
Which metals don't you buy?
Iron and steel, in any form, from cast iron to rebar. We do not buy catalytic converters either. Anything else, send a photo and ask.
Which exotic metals and alloys do you buy?
Inconel and other nickel superalloys, Hastelloy, Monel and other nickel alloys, titanium, cobalt alloys such as Stellite, tungsten, molybdenum, and tantalum and niobium. Solids, turnings, sheet, bar, wire and retired parts all count.
Is there a scrap metal buyer near me?
Near enough: we come to you. Pickup is free anywhere in Southern California, in counties including Los Angeles, Orange, Riverside, San Bernardino, San Diego, Ventura and Imperial, so you never haul a load across town to sell it.
How do I sell scrap metal to you?
Send photos and a rough weight with the quote form or by email, or call (562) 685-9090. We quote the lot; if the number works for you, we set a time, come out and load it.
How much is my scrap metal worth?
That depends on the alloy, the form, how clean it is and the weight, so every lot gets its own quote from its photos. Scrap metal prices explains what moves the number, metal by metal.
What should I have ready for the pickup?
A photo ID, the metal where we can reach it, and whatever you know about the alloy: a spec sheet, a work order, a stamped grade. If you sell for a business, have its name, address, phone number and business license or tax ID number handy. How selling works explains what California asks of sellers.
Have metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.